How to Fix a Leaky Shower Head in the Bathroom: 7 Steps

To many of us, the shower is a part of our lives where everything stressful in life comes to a standstill. Under a gentle, constant stream of water, we are able to put all of our thoughts into one place, while simultaneously getting ready to start or end our day. However, there may be a time when said stream of water may become interrupted.

Most shower heads, unfortunately, aren’t made to operate at the same level of functionality forever. The internal parts can become weakened overtime, and may be the result of some serious leaks occurring internally.

Should this happen to you, you can either call a plumbing service for help or try to fix the leaky shower head yourself. Here are seven, do-it-yourself solutions on how to fix a leaky shower head:

1. Get The Necessary Tools

Before you begin to fix a leaky shower head, start by preparing the necessary equipment. The most essential supplies here can probably be found in your toolbox, such as a pair of pliers. In addition, a wrench and some Teflon tape will come in relatively handy as well.

In order to cover the drain and bottom of the shower, you’ll also need a large towel. This is because water may come out in spontaneous, random bursts. Other supplies, such as vinegar for sterilization, will be required and eventually be put to use.

2. Locate The Water Supply

If the shower head is the only area that needs fixing, you should be able to avoid shutting off your home’s water supply. Sometimes, however, this isn’t the case and you’ll need to turn it off entirely. Whatever your circumstances may be, take care of this task first before moving ahead with fixing the shower head.

3. Remove The Shower Head

You can now commence to fix a leaky shower head. Your first step is to cover the drain and bottom of the shower with the aforementioned large towel. Then, after determining if the water supply should be shut off, remove the shower head in its entirety.

You could try to manually do this with your bare hands, as most shower heads aren’t that difficult to unscrew. On the other hand, some shower heads may be more tightly screwed on than initially thought. Use your pliers and crescent wrench to remove the head if this is the case.

4. Replace The Washers

Once the inside of the shower is exposed, take a look at the fixated washers. If they appear to be damaged or worn out, you should replace them with newer ones. Different shower heads will have different types of washers inside, so you’ll have to familiarize yourself with which one to get for replacement.

Once you have replaced the washers, or if they still look like they are in good shape, retrieve your Teflon tape. This will be used to rewrap the threads on the pipe. Just ensure the washer fits accordingly; the wrong one will create future leaks!

5. Clean The Shower Head

Once that task has been completed, turn your attention to the shower head itself. To ensure that it is sterilized enough for water to flow through seamlessly, you’ll need vinegar and a large container. The vinegar is used to dissolve deposits that may be hidden in the shower head.

Pour the vinegar into the appropriately-sized container. You should pour enough of the liquid inside to submerge the entire shower head. Generally speaking, this should be done before the previous steps have been completed, but it is up to your discretion. The more time you allot for the shower head to soak, the more the buildup inside can dissipate.

6. Rinse and Reattach the Shower Head

Once you have soaked the shower head inside of the container of vinegar, manually remove any observable deposits you can find. Then, rinse out the entire shower head with hot water. Once that has been completed, properly dry it with a clean towel.

It is now time to reattach the head to the base of the shower. If you are unable to manually attach it with your hands, retrieve those pliers and crescent wrench. Just be sure to not fasten it too tightly; daily cleaning of the head is encouraged!

7. Check for Shower Head Leaking

If all of these steps have been properly followed, you should have conducted a thorough repair. The last step is to turn the water back on and check to see if the leak still persists. If all is well, your shower should be back to working at an optimized rate. If not, it may be time to call in a professional service for an alternative fix!

There are many repair jobs within your home that can be rectified by yourself. All that is needed are a few supplies and a couple of hours allocated towards the fix. For leaky shower heads, be as thorough as possible and your shower will be back to normal in no time!

You Might Also Like